Door Handle Replacement
Door handles seem like something minor but if you aren't happy with the style or design of them, or are unable to use them then it's time to replace them. With a bit of patience, you can install a new handle in no time.
Modern door handles are typically equipped with cover plates that conceal the screws, giving them a more attractive appearance. However, you'll need to attach them separately if your new handle doesn't have them attached already.
Take off the handle from the old one.
The door handle isn't only a decoration for your home It's also an element of security that allows you to lock and unlock your door. However, over time the door handle could lose its grip, feel loose, or look old and worn out. This is an indication that it's time to replace it.
One of the first signs that your door handle is in need of replacing is if it's becoming difficult to operate. This is a serious problem as you will no longer be in a position to lock or unlock the door which could put your family and yourself at risk.
It's also an excellent idea to replace your door handle when it's damaged or broken. A damaged or broken door handle can be very dangerous, especially if your children or elderly family members struggle to open it, and get trapped in the. It's easy to fix a damaged handle on the door.
Modern door handles are typically standard sizes and should be able to fit any door. If you're not sure whether your new door handle will work, try removing the old one and measuring the holes in its housing. This will enable you to purchase the correct size door handle.
The easiest way to remove the door handle you have been using is to take it off of the door. This is typically done with a screw driver. Some door handles have an enclosure plate that hides the screws used to mount them. You will need to remove it to get to the screws. Once you've removed your old handle, take an outline of how the spindle is attached to ensure that you can be sure to align it when you install the new one.
You can also remove the door handle by removing the latch mechanism. This is usually done with a screwdriver but you'll need to find the small latch, which is located on the edge of the trim piece. After you have removed the latch, remove the handle from the strike plate and then the latch away from the door's edge.
Removing the Strike Plate
You'll have to replace your latch plate after replacing the handle. This is the plate that is the one that holds the hole in which the latch of the door hooks when the door closes. The new handles will come with two latch plates which are a circular and a rectangular plate (see the diagram above which illustrates the components of a door handle). If your current latch plate is a rectangular shape, switch it to a round one, so that the latch hooks into the strike plate in a way that makes the handle easier to operate.
The first step is to loosen the screw that is holding the latch plate in place. These screws can be quite tight, and will require some force to loosen. It is helpful to have a second person help with this part if possible.
The latch plate should easily be removed from the door once the screws have been removed. If the latch plate is stuck or refuses to move use a small file to scrape the edges. This may help free the plate.
You can now move on to preparing the new door strike plate for installation. Screw the latch plate into the door jamb using the screws that came with the new handles. Do not tighten the screws too much as this could damage the strike plate.
If you are not sure whether the latch plate is in the correct position, shut and open the door to see if it latches and closes correctly. If it doesn't then you'll need to adjust the strikeplate either up or down, forward or back until the door locks correctly.
If www.repairmywindowsanddoors.co.uk is jiggling or moving, you may need to increase the size of the hole for the latch in the strike plate. This is more prevalent on older doors. It can be caused by wear and tear hinges that are too shallow, the incorrect size of the latch or damaged strike plate. If this is the situation, follow the same procedure as adjusting the strike plate, but with an iron file instead of the hammer and chisel.
Eliminating the Latch
The latch is an angled metal piece which slides in and out of a hole in the inside of your door. The latch moves forward when you turn the handle. It also hooks into an opening in the door frame to keep the door shut. If your door shakes when you close it, changing the latch may be all you need to correct the issue.
It's difficult to see the screws that attach the latch to the door, however there's usually a tiny slot on the trim plate that lets you to insert a screwdriver into the slot and remove it. After removing the trim plate, you should be able to take off the latch and the bolts that hold it, as well as the spindle.
If the latch isn't easily removed using a paperclip or tool to take it off the handle mechanism. Insert the item into the slot for the latch that is recessed. gently move it around until you feel the latch and handle begin to separate. You may have to do this several times before the latch comes loose enough to let it out.
After the old latch is removed it should be possible to move the new latch into the slot without any difficulties. Use the new screws to attach the latch to the strike plate or door frame. Make sure that it is properly positioned in the slot and aligned with the screw chambers.
Measure the existing backset (the distance between the center of the large hole on the door's front and the edge) before installing the new handle. Verify that the size of the latch of the new handle is equal to the measurement.
You'll need a new cylinder for your lock if you're replacing the latch and handle, or your old one is damaged. If you're not changing locks the new lock should fit in your existing recess and work with the keys you have already. Be sure to choose the latch with a rectangular cover plate that match the handles you have.
Take off the cover plate
You can replace your door handles with a new rose and lever designs to enhance the appearance of your home. You can buy complete sets that come with the appropriate escutcheons and privacy adjustor kits.
To replace an internal door handle remove the cover plate (or rose) that protects the screws and the inner mechanism. Use a flathead to remove the plate. It may have an opening on one side or be secured by pins.
Once the cover plate is off take off the screw that holds the inside handle in place, and then set it aside. Take off the screws that hold both the inner and outer plates. You can loosen them with a Philips Screwdriver. Remove the inner plates and latch from the door. Place them aside.
Some doors don't have this gap. If yours does not, you'll need to make a hole in the door for the new handle. The process for doing this is similar to the procedure opening a door using locks, but you'll be taking extra care not to damage the frame or door.
After drilling the holes after which you'll have to put in new screws for the door knob. Purchase the same dimensions as your old screws to avoid getting the handle that is too loose or tight. It's also necessary to install the new strike rod and latch plate that aren't part of the majority of door handle sets.
If you're in search of a reliable replacement interior door handle set look no further than the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory-fit and has received a plethora of five-star reviews from satisfied customers. It's a great choice for replacing worn or damaged door handle hardware in the interior of your Chevy HHR.